adchem_06.jpg 
Print
 KS Series
 
Steel / Fibreglass Mixers
 
KS_Bild.jpg
 
 
Stamix KS Series steel/fibreglass mixers were
developed  as a  low-cost  alternative for mixing
two-component reactive resins. The  mixing ele-
ments are made of a high-grade, solvent resistant
plastic.
 
A transverse rod supports the elements at the outlet
end of the zinc-plated steel housing. Steel/fibreglass
mixers  are not suitable  for  the mixing of extremely
high viscosity materials at temperatures above 80°C.
 
Should a complete hardening occur within the mixer, the
low cost of  the unit allows for  easy replacement and
avoids unproductive cleaning.
  
 
 
 Technical Data
  
 Material Housing: zinc-plated carbon steel ST 35 (stainless steel available on request)           Elements: fibreglass reinforced engineering plastic (PBT)
 Number of  Elements 24 or 36
 Retention of Elements Brazed retention pin across the last element at downstream end of housing
 End Connectors
 Plain ends
 Max. operating temp.
 80 ºC
 Design Pressure
 Max. allowable operating pressure (see table below) according to DIN 2413,
scope og application I, permanent elongation limit 1% at 20ºC, safety factor 1.7
 Tolerances O.D. and wall: According to  DIN 2391, page 1, length +/- 1 mm
  
KS_Zeichnung_en.jpg
 
 
 
 
 
 
 
 


 
 
Inner Dia.
ID (mm)		 Outer Dia.
O.D. (mm)
 		Max. Operating Pressure (bar)
 		Length
L (mm)
 		No. of  Elements
 Part Number
 8 10 226
 203
 300
24
36
KS 08-10-24
KS 08-10-36
 11 14 242  277
 411		 24
36 		KS 11-14-24
KS 11-14-36
 13 16 212  327
 486		 24
36		 KS 13-16-24
KS 13-16-36
 16 20 226  402
 596		 24
36		 KS 16-20-24
KS 16-20-36
 20
25 226  501
 744		 24
36		 KS 20-25-24
KS 20-25-36
           
               Adchem GmbH * Zum Handwerkerhof 3 * 90530  Wendelstein * Tel.+49 (0)9129 90706-0 * Info(at)adchem.de
 
 

Adchem GmbH

Zum Handwerkerhof 3
90530 Wendelstein 

Tel.: +49 (0) 9129 / 90 706 - 0
Fax: +49 (0) 9129 / 90 706 - 10

Email: info(at)adchem.de