Willkommen bei Adchem GmbH - AE Series

Mixer Accessories

Quadro Accessories

Print

AE Series

Stainless Mixers with Removable Elements

Stamix AE Series stainless steel tube mixers are fitted with

removable elements and are designed for use with 2-component

reactive silicone elastomers, silicone foams and resin systems

with fillers where cleaning is not possible by burning out the mixer

content.

A retaining ring positioned at the outlet end of the housing, supports

the elements by means of the downstream part of the compression

fitting.

This type of mixer should be cleaned immediately after use and

it is recommended to flush it with the main component only and

then with a mixture of solvent/air. Should further cleaning still be

necessary the elements may be removed and soaked in solvent.

Technical Data
Material	Housing: Stainless steel 1.4571; Elements: Stainless steel 1,4404 or 1.4435
Number of elements	12 or 18
Retention of elements	Retention ring on downstream end og housing
End Connectors	ERMETO fitting
Design Pressure	Max. allowable operating pressure (see table below) according to DIN 2413, scope of application 1, permanent elongation limit 1% at 20°C, safety factor 1.7
Tolerances	O.D. and wall: According to DIN 2391, page 1; Length +/- 1 mm

Inner Dia. ID (mm)	Outer Dia. OD (mm)	Retaining ring Inner Dia. C(mm)	Max. Operating Pressure (bar)	Length L (mm)	No. of Elements	Part-Number	Thread T
8	12	6	467	154 226	12 18	AE 08-12-12 AE 08-12-18	M 20 x 1.5
10	14	8	400	192 282	12 18	AE 10-14-12 AE 10-14-18	M 22 x 1.5
12	16	10	350	230 338	12 18	AE 12-16-12 AE 12-16-18	M 24 x 1.5
15	20	12	350	290 425	12 18	AE 15-20-12 AE 15-20-18	M 30 x 2
20	25	16	280	385 556	12 18	AE 20-25-12 AE 20-25-18	M 36 x 2
25	30	20	233	486 714	12 18	AE 25-30-12 AE 25-30-18	M 42 x 2

Adchem GmbH * Zum Handwerkerhof 3 * 90530 Wendelstein * Tel.+49 (0)9129 90706-0 * Info(at)adchem.de

Adchem GmbH

Zum Handwerkerhof 3
90530 Wendelstein

Tel.: +49 (0) 9129 / 90 706 - 0
Fax: +49 (0) 9129 / 90 706 - 10

Email: info(at)adchem.de